We're a Grand Rapids, West Michigan based concrete flooring expert specializing in concrete polishing, floor cleaning, installation of polyurethane and epoxy floor coatings of indoor cement surfaces, and the restoration of concrete floors for industrial, commercial, and residential clients. For our commercial & industrial flooring clients this usually involves manufacturing floors, chemical containment areas, electrically sensitive area requiring conductive or ESD (electro-static dissipative) properties, food processing areas, production floors, warehouse floors, as well as bathroom floors, and/or break room floors in factories. For residential flooring clients this primarily involves their concrete garage floors.
Concrete floor coatings are special resins (most often polyurethane or epoxy) that when properly applied create an impenetrable coating, or layer on cement preventing the transmission of water and contaminants while at the same time keeping the structure safe. Installation of resinous flooring is commonly used for sealing, waterproofing, repairing, restoration and resurfacing of concrete. Flexible polymer coatings are used in multi story and pre-cast cement structures such as parking ramps and mechanical rooms, waterproofing the levels below and protecting against chemicals and physical abuse. Oil, salt and other chemicals can cause damage to structures, especially in high traffic areas. Resinous floor coatings can be used to prevent, reduce and repair damage in such areas. The most common types of Resinous flooring systems include epoxy coating, epoxy resurfacer or epoxy mortar, urethane coating, urethane mortars, polyurea, as well as polyaspartic coating application. By focusing on cost-effective coating technology that protects the environment while protecting concrete surfaces, Vanguard Concrete Coating provides users with safe, long-term epoxy flooring & finishing protection that reduces maintenance and expenses.
Concrete polishing is the process of mechanically and chemically transforming concrete to an attractive easy to clean finish with various levels of gloss options and aggregate exposure. Heavy-duty concrete polishing machines equipped with progressively finer grits of diamond-impregnated abrasives are used to gradually grind down surfaces to the desired degree of shine and smoothness.
Concrete polishing begins with the use of coarse diamond segments bonded in a metallic matrix. These segments are coarse enough to remove minor pits, blemishes, stains, or light coatings from the floor in preparation for final smoothing. The next steps involve fine polishing of the concrete surface using diamond abrasives embedded in a plastic or resin matrix. Crews use ever-finer grits until the floor has the desired sheen.
During the polishing process an internal impregnating hardener or densifier is applied. The densifier sinks into the concrete and is invisible to the naked eye. It not only protects the concrete from the inside out, it also hardens and densifies the concrete. This eliminates the need for a topical coating and aids gloss retention. A concrete dye or stain can also be added to the process to provide color concrete options.
company standard colors for epoxy flooring are displayed on our colors page; We
offer custom epoxy paint colors, decorative flake flooring, decorative quartz
flooring, metallic epoxy, as well as decorative logos, lettering and traffic
Concrete Floor Preparation Services
Vanguard offers several forms of surface preparation including shot blasting, diamond grinding, and scarification. We know that preparation is the key to a great finish. Over 80% of coating failures can be attributed to improper or insufficient prep. It is important to provide a clean surface free of contaminants and defects with a profile or texture.
The most common type of polymer flooring installation is the epoxy floor. Epoxy flooring installation can accomplished by squeegeeing the epoxy, roller epoxy application, epoxy slurry and broadcast as well as Epoxy power Troweled resurfacer where the epoxy is screed applied normally at 1/4 inch and a mixture of epoxy resin and blended aggregates are combined to make an epoxy mortar which is then finished with hand trowels and power trowels in order to resurface and restore the concrete surface. An epoxy floor coating may be applied as thin as a coat of paint or up to 3/8 of an inch. Epoxy may be applied several inches in thickness on areas that are in need of repair. Industrial epoxy flooring installation requires well trained applicators, specialized preparation, and working knowledge of the proper epoxy coatings or epoxy resurfacers for the individual application. Epoxy floor coatings may offer varying degrees of chemical resistance, ultraviolet resistance, as well as speed of cure time and installation thicknesses. As a general rule the faster it dries, the higher the chemical resistance, the better the UV stability and the thicker the floor the more it will cost. This is why it is important to understand epoxy flooring installation to compare the product or installation with another, rather than just picking the least expensive product or epoxy flooring installer.
For industrial and commercial flooring projects we work in Michigan cities such as Muskegon, Grand Haven, Norton Shores, Big Rapids, Cadillac, Reed City, Howell, Lansing, Jackson, Battle Creek, Kalamazoo, Hastings, Plainwell, Otsego, South Haven, Benton Harbor, St Joseph, Holland, Grand Haven, Grand Rapids, Wyoming, Kentwood, Grandville, Portage, Walker, Byron Center, Cascade Township, and Ada. For residential garage projects we generally only bid on work within 30 miles of Grand Rapids, MI.